vi
Important Information
CARRYING/TRAN SPORTING THE PROJECTOR
This projector is a precision machine. Do not give a strong shock to the projector or turn it down.
Thoroughly read "Use Caution When Carrying or Transporting the Projector" below and install the lens cap before car-
rying the projector. When transporting the projector by train or airplane, use a highly crashworthy transport case.
Use Caution When Carry ing or Transporting the Projector
The carrying bag is intended for protection from dust and scratches on the surface of the cabinet, and it is not designed
to protect the projector from external shocks. When carrying the projector with it put in the carrying bag, do not give a
shock to it, drop it, or place anything on it.
Do not transport the projector through a courier or transport service with the carrying bag. The projector can damage.
Remote Control Precaut ions
• Handle the remote control carefully.
• If the remote control gets wet, wipe it dry im mediately.
• Avoid excessive heat and humidity.
• Do not heat, take apart, or throw batteries into re.
• If you will not be using the remote control for a long tim e, remove the batteries.
• Ensure that you have the batteries' polarity (+/-) aligned correctly.
• Do not use new and old batteries together, or use different t ypes of batteries together.
• Dispose of used batteries accordi ng to your local regulations.
About [High altitude] mode
LV-7365
• Set [Fan mode] to [High altitude] when using the projector at altitudes app roximately 5500 feet/1600 meters or
higher.
Using the projector at altitudes approximately 5500 feet/1600 meters or higher without set ting to [High altitu de]
can cause the projector to overheat and the protector coul d shut down. Furthermore, the projector could not turn
on due to the increased te mperature of the lamp after power off. If these happe n, wait a couple minutes an d
turn on the projector.
• Using the projector at altitu des less than approximately 550 0 feet/1600 meters and setting to [High altitude] can
cause the lamp to overcool, causing the image to icker. Switch [Fan mode] to [Auto].
• Using the projector at altitudes a pproximately 5500 feet/1600 meters or high er can s horten the life of optical
components such as the lamp.
LV-7265/LV-7260/LV-X7
• On LV-7265, LV-7260, and LV-X7 [Fan mode] menu does not have [High altitude]. Select [High] in [Fan mode] if
you use the projector at a high altitude or under low atmos pheric pressure.