Preparing the Camcorder

1 Activate the [Monitor while Out] function.

0>[ Remote Control+Streaming] > [ Monitor while Out] >[OK]

•The first time you activate the function, you will need to set a password and the port to be used by this function (steps 2-4). If you have already completed the settings for the Monitor while Out function, skip to step 5.

2 Touch [OK] to open the settings screen.

3To enter the [Password] field, touch [Not configured]. Enter a unique password for the Monitor while Out function and touch [OK].

•The password must be between 4 and 8 characters long. We recommend using an 8-character password using a mix of numbers and uppercase/lowercase letters.

•To enter the password (and the port number in the next step) use the virtual keyboard (A124).

4To change the port number to be used, touch [80]. Enter a different port number and touch [ K].

By default, the port number is set to 80 but you can change it if necessary.

5If necessary, set up a connection to an access point.

•If you have previously configured and saved a connection to an access point, the camcorder will connect automatically to the last access point used. Continue to step 6.

•If no connections to access points have been saved in the camcorder, the message [Save the access point] will appear on the screen. Touch [OK] to configure and save a new access point connection (step 2 in Wi-Fi Connection Using an Access Point (A134)) before continuing with this procedure.

6When the wireless connection is successfully established, the camcorder's ID will be displayed on the screen.

The camcorder will be ready to connect with the iOS/Android device.

122Š Wi-Fi Functions