Canon 9173B004, 9175B001, 9176B002 Wi-FiProtected Setup (WPS), 132), 122);, 130);, When the, Step 6 in, Step 2 in, Step 2 in, Wi-FiFunctions Š, 1[WPS: Button] method, [WPS: PIN Code] method

Wi-Fi Protected Setup (WPS)

If your access point is WPS-compatible (bears the logo shown on the right), connecting the cam- corder to it can be very easy. If you cannot successfully connect the camcorder using WPS, try

using the [Search for Access Points] method. Refer also to the access point’s (wireless router’s) instruction manual.

1[WPS: Button] method

Press and hold the WPS button on the wireless router.

•Depending on the router, the amount of time required may differ.

•Make sure the router’s WPS function is activated.

[WPS: PIN Code] method

From a computer or similar device connected to the access point, use the Web browser to open the router’s WPS settings screen. After the

8-digit PIN code appears on the camcorder’s screen, enter it into your router’s WPS settings screen.

2Within 2 minutes, touch [OK] on the camcorder’s screen.

•The camcorder will connect to the access point.

•You can touch [Stop] and then [OK] to interrupt the Wi-Fi Protected Setup while it is in progress.

•When the Wi-Fi Protected Setup is finished, [Configuration completed] will appear on the screen.

3Touch [OK] to save the configuration.

•If you were in the process of performing another procedure, the camcorder will automatically connect to the access point. Return to the procedure of the function you were previously using:

Step 6 in Streaming via Wi-Fi and Internet (Monitor while Out)

(A122); Step 2 in Sharing Your Recordings Using Web Services (A130); Step 2 in Wireless Playback on a Computer (A132).

•Otherwise, touch [K] >[X] to close the menu.

Wi-Fi Functions Š 135