!Indicates Auxiliary Gage Fault
!Indicates Fault Warning
!Indicates Derate or Shutdown Condition Fault
5.Touching the “Enter Button” will redisplay the hidden fault. Touching the “Enter Button” once again will hide the fault and return the screen to the single or four parameter display. NOTE:The fault can only be cleared by correcting the cause of the fault condition.
1 of x
ENGINE OIL PRESSURE
GAGE NOT RESPONDING
HIDE
Active Fault Codes
1.During normal operation the single or four parameter screen will be displayed.
125°F |
|
| 98% | 1000 RPM | ||||
| 1000 RPM | |||||||
|
|
| LOAD RPM | ENG RPM | ||||
COOL TEMP |
| ENG RPM |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
143°F |
|
|
|
|
|
|
| |
| 57 PSI | 14.2 | 57 PSI | |||||
OIL TEMP |
|
|
| BATT VOLT | OIL PRES | |||
| OIL PRES |
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2.When the PowerView receives a fault code from an engine control unit the single or four parameter screen will be replaced with the “Active Fault Codes” message.
1 of x | WARNING |
SPN110 FMI10
HIGH COOLANT TEMP
MORE
HIDE
3. If the word “MORE” appears above the “Arrow Buttons”, there are more active fault codes that may be viewed. Use the “Arrow Buttons” to scroll to the next “Active Fault Code”.
1 of x
SPN110 FMI10
HIGH COOLANT TEMP
MORE
HIDE
4.To acknowledge and “Hide” the fault and return to the single or four parameter display touch the “Enter Button”.
1 of x
SPN110 FMI10
HIGH COOLANT TEMP
MORE
HIDE
5.The display will return to the single or four parameter display but the display will contain the “Active Fault” warning icon.Touching the “Enter Button” will redisplay the hidden fault.
|
|
| ! | 98% |
| 1000 RPM | |||
|
|
| |||||||
0 | 1500 | 3000 | LOAD RPM |
| ENG RPM |
| |||
| 1800 RPM |
|
| ! |
|
| |||
|
|
|
|
| |||||
|
|
|
| 14.2 |
| 57 PSI |
| ||
ENG RPM | COOL TEMP! | BATT VOLT |
| OIL PRES | ! | ||||
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
6.Touching the “Enter Button” once again will hide the fault and return the screen to the single or four parameter display.
1 of x | WARNING |
SPN110 FMI10
HIGH COOLANT TEMP
MORE
HIDE
7.The Single or Four parameter screen will display the fault icon until the fault condition is corrected. NOTE: Ignoring active fault codes could result in severe engine damage.
|
|
|
|
|
|
|
GO TO | 98% |
| 1000 RPM | |||
STORED CODES |
| |||||
| LOAD RPM |
| ENG RPM | |||
ENGINE CONFG |
|
|
| ! |
| |
SETUP |
|
|
|
| ||
|
|
|
| |||
14.2 |
| 57 PSI | ||||
SELECT UNITS |
| |||||
| BATT VOLT |
| OIL PRES | |||
ADJUST BACKLIGHT |
|
|
|
|
|
|
|
|
|
|
|
|
|
PAGE 26 —
