Multiquip operation manual DCA-150SSJU3— DIAGNOSTIC DISPLAY, First Time Start Up, 1800 RPM

DCA-150SSJU3 — DIAGNOSTIC DISPLAY

First Time Start Up

1.When power is first applied to the diagnostic display, the “Logo” is displayed.

2.The first seven items of the “Main Menu” will be displayed.Touching the “Arrow Buttons”will scroll through the menu selection.

GO TO 1-UP DISPLAY

LANGUAGES

STORED CODES

ENGINE CONFG

SETUP 1-UP DISPLAY

SETUP-4-UP DISPLAY

SELECT UNITS

2. The “Wait to Start” message will be displayed for	3. Touching the right arrow button will scroll down to reveal
engines with a pre-startup sequence. Once the “Wait to	the last items of “Main Menu” screen highlighting the
	next item down.
Start” message is no longer displayed the operator may
start the engine. Note: Displays only when SAE J1939

message is supported by engine manufacturer.

ADJUST BACKLIGHT

ADJUST CONTRAST

UTILITIES

WAIT TO

START

PREHEAT

3. Once the engine has started the single engine parameter is displayed.

4. Touch the Arrows” to scroll to the desired menu item or touch “Menu” to exit the Main menu and return to the engine parameter display.

0 1500 3000

1800 RPM

ENG RPM COOL TEMP

Main Menu Navigation

	0	1500		3000	98%
		1800 RPM			LOAD RPM
					14.2
			COOL TEMP
ENG RPM
					BATT VOLT

Selecting a Language

1000 RPM

ENG RPM

57 PSI

OIL PRES

1.Starting at the single or four engine parameter display, touch “Menu”.

1.Starting at the main menu display use the “Arrows to scroll to the “Language” menu and once highlighted touch the “Enter” button.

0	1500		3000	98%
	1800 RPM			LOAD RPM
				14.2
		COOL TEMP
ENG RPM
				BATT VOLT

1000 RPM

ENG RPM

57 PSI

OIL PRES

GO TO 1-UP DISPLAY

LANGUAGES STORED CODES ENGINE CONFG SETUP 1-UP DISPLAY SETUP-4-UP DISPLAY SELECT UNITS

DCA-150SSJU3— OPERATION AND PARTS MANUAL — REV. #0 (11/14/07) — PAGE 23