Multiquip operation manual Contrast Adjustment, DCA-150SSJU3— DIAGNOSTIC DISPLAY, 1800 RPM

DCA-150SSJU3 — DIAGNOSTIC DISPLAY

3.Once the “Adjust Backlight” menu item has been highlighted touch the “Enter Button” to activate the “Adjust Backlight” function.

Contrast Adjustment

1.Starting at the single or four engine parameter display, touch the “Menu Button”.

GO TO 1-UP DISPLAY STORED CODES ENGINE CONFG SETUP 1-UP DISPLAY SETUP-4-UP DISPLAY SELECT UNITS

ADJUST BACKLIGHT

98%

0	1500		3000	LOAD RPM
	1800 RPM
				14.2
		COOL TEMP
ENG RPM				BATT VOLT

1000 RPM

ENG RPM

57 PSI

OIL PRES

4. Use the “Arrow Buttons” to select the desired backlight	2. The main menu will pop up on the display.Use the “Arrow
intensity.	Buttons” to scroll through the menu until “Adjust Contrast”
	is highlighted.
ADJUST BACKLIGHT
	GO TO 1-UP DISPLAY
	STORED CODES
	ENGINE CONFG
	SETUP 1-UP DISPLAY
	SETUP-4-UP DISPLAY
	SELECT UNITS
	ADJUST BACKLIGHT

5.Touch the “Menu Button” to return to the main menu.

ADJUST BACKLIGHT

6.Touch the “Menu Button” to exit the Main menu and return to the engine parameter display.

3.Once the “Adjust Contrast” menu item has been highlighted touch the “Enter Button” to activate the “Adjust Contrast” function.

STORED CODES

ENGINE CONFG

SETUP 1-UP DISPLAY

SETUP-4-UP DISPLAY

SELECT UNITS

ADJUST BACKLIGHT

ADJUST CONTRAST

GO TO 1-UP DISPLAY STORED CODES ENGINE CONFG SETUP 1-UP DISPLAY SETUP-4-UP DISPLAY SELECT UNITS ADJUST BACKLIGHT

98%

LOAD RPM

14.2

BATT VOLT

1000 RPM

ENG RPM

57 PSI

OIL PRES

4.Use the “Arrow Buttons” to select the desired contrast intensity.

ADJUST CONTRAST

5.Touching the “Menu Button” will take you back through the menus.

PAGE 28 — DCA-150SSJU3— OPERATION AND PARTS MANUAL — REV. #0 (11/14/07)