Multiquip DCA-150SSJU3 Generator OutputVoltages, Voltage Change-Over Board, Generator Amperage

DCA-150SSJU3 — GENERATOR OUTPUTS

Generator OutputVoltages

A wide range of voltages are available to supply voltage for many different applications. Voltages are selected by apply- ing jumpers (6) to the voltage change-over board (Figure 15). To obtain some of the voltages as listed in Table 6 (see below) will require a fine adjustment using the voltage regu- lator (VR) control knob located on the control panel.

Voltage Change-Over Board

The voltage change-over board (Figure 16) is located on the control box, behind the generator control panel. This board has been provided for ease of voltage selection.

Generator Amperage

Tables 8 and 9 describe the generator’s current output capa- bility for both 1Ø-phase and 3Ø phase applications.

Table 8. Generator Ampere Ratings ⎯ 1∅

kW	120V	240V
10	83	233
20	166	317
40	333	400
60	500	483
80	667	568
100	833	650
120 (Max)	1,000	500

Figure 16. Voltage Change-Over Board

CAUTION - CHANGINGVOLTAGES

NEVER attempt to place jumper plates on the voltage change-over board while the generator is in operation. There exist the possibility of electrocution, electrical shock or burn, which can cause severe bodily harm or even death!

Table 9. Generator Ampere Ratings ⎯ 3∅

KVA	240V	480V
25	60	30
45	108	54
60	144	72
70	168	84
82	197	99
100	241	120
125	301	150
150	361	180

Table 7. Voltages Available

Three Phase	208V	220V	240V	416V	440V	480V
(Selectable)
Single Phase	120V	127V	139V	240V	254V	277V
(Selectable)

PAGE 44 — DCA-150SSJU3— OPERATION AND PARTS MANUAL — REV. #0 (11/14/07)