Multiquip DCA-150SSJU3 operation manual Output Terminal Familiarization, Output Terminal Panel

DCA-150SSJU3 — OUTPUT TERMINAL PANEL FAMILIARIZATION

Output Terminal Panel

The OutputTerminal Panel (Figure 9) shown below is located on the right-hand side (left from control panel) of the generator. Lift up on the cover to gain access to receptacles and terminal lugs.

NOTE	Terminal legs “O” and “Ground”
	are considered bonded grounds.

Output Terminal Familiarization

The “OutputTerminal Panel ” (Figure 8) is provided with the following:

■Three (3) 120/240V output receptacles @ 50 amp

■Three (3) Circuit Breakers @ 50 amps

■Two (2) 100V GFCI receptacles @ 20 amp

■Two (2) GFCI Circuit Breakers @ 20 amps

■Five (5) Output Terminal Lugs ( U, V, W, O, Ground)

Figure 9. Output Terminal Panel

PAGE 40 — DCA-150SSJU3— OPERATION AND PARTS MANUAL — REV. #0 (11/14/07)