•During exposure lock, yand the exposure compensation value will appear on the screen.

Touch AE

2Touch a subject that appears inside the yframe.

•The Touch AE mark (I) will flash and the exposure will be optimized automatically for the subject you selected.

•Touch [n] to return the camcorder to automatic exposure.

3Touch [X] to apply the selected shooting mode and adjusted exposure.

•Using Touch AE also locks the exposure (the exposure compensation dial appears with the compensation value set at ±0). Before touching [X], you can compensate the exposure further (steps 3 and 4 in the previous procedure).

•During exposure lock, yand the exposure compensation value will appear on the screen.

NOTES

•If the shooting mode is changed during exposure lock, the camcorder will return to automatic exposure.

•By default, the camcorder corrects for backlight conditions. You can turn off the automatic correction with the 1>p>[Auto Back- light Correction] setting.

Adjusting the Focus

Autofocus may not work well on the following subjects. In such case, focus manually.

• Reflective surfaces

• Fast moving subjects

• Subjects with low contrast

• Through wet windows

or without vertical lines

• Night scenes

Operating modes:

 

SCN

76 Š Advanced Shooting