Flash

Still Images

Changing the Flash Mode

You can change the flash mode to match the shooting scene. For details on the flash range, see “Flash Range” (=190).

1Raise the flash. zzMove the <h> switch.

2Configure the setting.

zzPress the <r> button, choose a flash mode (either press the <q><r> buttons or turn the <5> dial), and then press the <m> button.

zzThe option you configured is now displayed.

• The setting screen cannot be accessed by pressing the <r> button when the flash is lowered. Move the <h> switch to raise the flash, then configure the setting.

[ ] Auto

Fires automatically in low-light conditions.

[h] On

Fires for each shot.

[Z] Slow Synchro

Fires to illuminate the main subject (such as people) while shooting at a slower shutter speed to illuminate backgrounds out of flash range.

• In [Z] mode, mount the camera on a tripod or take other measures to keep it still and prevent camera shake. Additionally, you should set [IS Mode] to [Off] when using a tripod or other means to secure the camera (=82).

•In [Z] mode, even after the flash fires, ensure that the main subject does not move until the shutter sound is finished playing.

[!] Off

For shooting without the flash.

• If a blinking [] icon is displayed when you press the shutter button halfway in camera-shake inducing, low-light conditions, mount the camera on a tripod or take other measures to keep it still.

Before Use

Basic Guide

Advanced Guide

Camera Basics

Auto Mode / Hybrid

Auto Mode

Other Shooting

Modes

P Mode

Tv, Av, and M Mode

Playback Mode

Wi-Fi Functions

Setting Menu

Accessories

Appendix

Index

80