4Install the files.
zzInstallation may take some time, depending on computer performance and the Internet connection.
zzClick [Finish] or [Restart] on the screen after installation.
zzAfter installation when the camera is connected to the computer, turn the camera off before disconnecting the cable.
•Because the content and functions of software vary according to the camera model, if you have several cameras, you must use each camera to update to its latest version of the software.
On a computer running Windows, configure the following settings before connecting the camera to the computer wirelessly.
1Confirm that the computer is connected to an access point.
zzFor instructions on checking your network connection, refer to the computer user manual.
2Configure the setting.
zzClick in the following order: [Start] menu ► [All Programs] ► [Canon Utilities] ► [CameraWindow] ►
zzIn the application that opens, follow the
• The following Windows settings are configured when you run the utility in step 2. - Turn on media streaming.
This will enable the camera to see (find) the computer to access via
-Turn on network discovery.
This will enable the computer to see (find) the camera.
-Turn on ICMP (Internet Control Message Protocol). This allows you to check the network connection status.
-Enable Universal Plug & Play (UPnP).
This will enable network devices to detect each other automatically.
•Some security software may prevent you from completing the settings as described here. Check the settings of your security software.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
122