Still Images
Specific Shutter Speeds and Aperture
Values ([M] Mode)
Follow these steps before shooting to set your preferred shutter speed and aperture value to obtain the desired exposure.
For details on available shutter speeds and aperture values, see “Shutter Speed” (=191) and “Aperture” (=191).
1Enter [D] mode. zzSet the mode dial to [D].
• After you set the shutter speed or aperture value, the exposure level |
may change if you adjust the zoom or recompose the shot. |
• Screen brightness may change depending on your specified shutter |
speed or aperture value. However, screen brightness remains the |
same when the flash is up and the mode is set to [h]. |
• To have the setting you did not configure in step 2 (whether shutter |
speed or aperture value) automatically adjusted to obtain standard |
exposure, hold the shutter button halfway and press the <o> |
button. Note that standard exposure may not be possible with some |
settings. |
• With shutter speeds of 1.3 seconds or slower, ISO speed is [100] |
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Aperture Value
Shutter Speed
Standard
Exposure Level
Exposure
Level Indicator
Exposure Level
Mark
2Configure the setting.
zzPress the <o> button, choose
adjustment of shutter speed or aperture value, and turn the <5> dial to specify a value.
zzAn exposure level mark based on your specified value is shown on the exposure level indicator for comparison to the standard exposure level.
zzThe exposure level mark is shown in orange when the difference from standard exposure exceeds 2 stops.
| and cannot be changed. |
|
|
• | [D]: Manual |
• | Calculation of standard exposure is based on the specified metering method |
| (=70). |
Tv, Av, and M Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
86