Canon 9338B001, 9339B001 Registering Image Sync to the

3Establish the connection.

zzConnect to the smartphone as described in steps 5 – 9 in “Connecting to WPS- Compatible Access Points” (=125 – 127) or steps 4 – 6 in “Connecting without an Access Point” (=130).

zzAfter a connection is established with the smartphone, the smartphone nickname is displayed on the camera. (This screen will close in about one minute.)

zzYou can now use the smartphone to import images from the camera. (The camera cannot be used to send images to the smartphone.)

zzUse the smartphone to end the connection; the camera will automatically turn off.

zzFrom now on, you can simply press the

<> button to connect to the registered smartphone.

•When you are in the vicinity of an access point that you have previously connected to, the camera will automatically connect to it in step 2. To change access points, select [Switch Network] from the screen that will be displayed when the connection is being established, and follow steps 5 – 9 in “Connecting to WPS- Compatible Access Points” (=125 – 127).

•All images in the camera can be viewed from the connected

smartphone. Note that if you have assigned the < > button, [View Settings] (=143) is not available.

•One smartphone can be registered to the < > button. If you wish to register a different smartphone, clear the one currently registered (=139) first.

Registering Image Sync to the < > Button

By registering Image Sync to the < > button, you can simply press the

<> button to send any unsent images on the memory card to a computer via CANON iMAGE GATEWAY. For details on Image Sync, see “Sending Images Automatically (Image Sync)” (=139).