3Choose the type of images to send (only when sending movies with images).
zzPress the <n> button, and then choose
zzPress the <o><p> buttons to choose [Image Sync], and then press the <q><r> buttons to choose [Stills/Movies].
•To choose a Web service as the destination, follow the steps in “Registering Other Web Services” (=119) to update the camera settings.
Images sent from the camera are automatically saved to the computer.
If the computer that you intend to send images to is turned off, the images will be stored temporarily on the CANON iMAGE GATEWAY server. Stored images are regularly erased, so make sure to turn on the computer and save the images.
zzFollow the steps in “Connecting to WPS- Compatible Access Points” (=125) to choose [].
zzOnce the connection is established, the images are sent.
zzWhen the images have been sent successfully to the CANON iMAGE GATEWAY server, [] is displayed on the screen.
zzImages are automatically saved to the computer when you turn it on.
zzImages are automatically sent to Web services from the CANON iMAGE GATEWAY server, even if the computer is off.
• When sending images, you should use a fully charged battery pack or an AC adapter kit (sold separately, =156).
• Even if images were imported to the computer through a different method, any images not sent to the computer via CANON iMAGE GATEWAY will be sent to the computer.
•Sending is faster when the destination is a computer on the same network as the camera, because images are sent via the access point instead of CANON iMAGE GATEWAY. Note that images stored on the computer are sent to CANON iMAGE GATEWAY, so the computer must be connected to the Internet.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
140