Previous Access Points

You can reconnect to any previous access points automatically by following step 3 in “Connecting without an Access Point” (=129).

•To use the camera as an access point, choose [Switch Network] on the screen displayed when you establish a connection, and then choose [Camera Access Point Mode].

•When reconnecting via a previous access point, connect the target device to the access point in step 4.

•To switch access points, choose [Switch Network] on the screen displayed when you establish a connection, and then follow the procedure in “Connecting to WPS-Compatible Access Points” from step 5 (=125).

Connecting to Another Camera

Connect two cameras via Wi-Fi and send images between them as follows.

• Only Canon-brand cameras equipped with a Wi-Fi function can be connected to wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot be connected to if they do not have a Wi-Fi function. You cannot connect to DIGITAL IXUS WIRELESS cameras with this camera.

1Access the Wi-Fi menu (=123).

2Choose camera.

zzPress the <o><p><q><r> buttons or turn the <5> dial to choose [4], and then press the <m> button.

3Choose [Add a Device].

zzPress the <o><p> buttons or turn the <5> dial to choose [Add a Device], and then press the <m> button.

zzFollow steps 1 – 3 on the target camera too.

zzCamera connection information will be added when [Start connection on target camera] is displayed on both camera screens.

Before Use

Basic Guide

Advanced Guide

Camera Basics

Auto Mode / Hybrid

Auto Mode

Other Shooting

Modes

P Mode

Tv, Av, and M Mode

Playback Mode

Wi-Fi Functions

Setting Menu

Accessories

Appendix

Index

132