Various Functions

1Install the driver and the software applications bundled on the Canon Digital Camera Solution

Disk (first time only).

z Please see the Canon Digital Camera Software Starter Guide Disk for the installation procedures.

2Use the supplied interface cable to connect the computer's USB port to the camera's DIGITAL terminal.

USB port

Interface cable

DIGITALTerminal

1. Open the terminal cover with your finger nail.

2. Hold the USB connector so the side is up, then insert it into the DIGITAL terminal securely.

Always grasp the connector’s sides to remove the interface cable from the camera’s DIGITAL terminal.

3Slide the camera's mode switch to .

Various Functions

111

Page 113
Image 113
Canon A95 manual Disk first time only, Slide the cameras mode switch to, USB port Interface cable DIGITALTerminal