Canon A95 manual Press the shutter Button all the way, Pressing Halfway, Pressing Fully

Shooting – The Basics

Pressing Halfway

Pressing halfway automatically sets the exposure and focus.

•Two beeps will sound when the camera has finished metering, and the upper indicator will light green or orange. If the LCD monitor is on, the AF frame will appear green.

•The lower indicator will blink yellow and the beep will sound one time if the subject is difficult to focus on.

7Press the shutter

button all the way.

Pressing Fully

Pressing fully releases the shutter.

• You will hear the shutter sound when the shot is complete. Do not move the camera until you hear this sound.

•The upper indicator blinks green while data is recorded onto the CF card.

•The picture appears for approximately two seconds on the LCD monitor, if it is on.

z See page 159 for settings that can be

changed in this mode.

z With the Review function, you can change the length of time images show on the LCD monitor after shooting, or set it so they do not show at all (p. 37).

z If the orange or yellow indicator blinks while you press halfway, you can still press fully to take the shot.

z Images are first saved into the camera’s internal memory before being recorded onto the CF card, allowing the next images to be taken immediately as long as sufficient space is available in the internal memory.

z The beep and shutter sound can be set On/Off in the Set up menu (p. 71).

z Even when the shutter sound is set to

[, , (On)] (p. 74), no sound will be heard if [Mute] is set to [On].

z There is no shutter sound in movie mode.

z Shots cannot be taken while the flash is charging.

The Basics

35