37
Shooting – The Basics
The Basics
- If the AF-assist beam is turned off, it
may become more difficult for the
camera to focus in dark conditions.
- The red-eye reduction lamp may emit
when you press the shutter button
halfway even if the AF-assist beam is
turned off.
In order to prevent any lamp from
emitting before the flash fires, set both
the red-eye reduction function and the
AF-assist beam to [Off] in the Shooting
menu.
Reviewing an Image Right after Shooting

After a photo is taken, the image displays on

the LCD monitor for two seconds. In addition,

the image will keep on displaying regardless

of the review duration setting if one of the

following operations is performed.

zKeeping the shutter button fully pressed
zPressing the SET button while the image is
displayed*
Press the shutter button halfway again to stop
displaying it so that you can shoot the next image.
* Not available in (Stitch Assist) mode.
Mode Dial
You can perform the following while
images are displayed.*
• Erase Images Individually (p. 64)
• Display the setting details of the image
(p.28).
• Magnify Images (p. 58) (When pressing
the SET button while the image is
displayed.)