Battery Usage

Using the Battery Pack (CP-300 Only)

With the CP-300, you can use the rechargeable battery pack (Battery Pack NB- CP1L) to print.

The battery pack can either be charged in the printer or with the separately sold battery charger (included with the Battery/Charge Adapter Kit BCA-CP100).

„Charging the Battery Pack in the Printer

Attach the battery pack NB-CP1L to the printer to charge it.

1

Terminal Cover

Remove the battery pack’s terminal cover.

When the battery pack is not in use, always store it with its terminal cover on.

2

Press the battery cover lever

down and remove the battery

cover.

3

Install the battery pack.

• Slide the battery pack into place, in the

direction of the arrow, and push it in until it

 

clicks into place.

 

• To remove the battery pack, push the

 

battery cover lever down and pull the battery

 

pack out. Replace the battery cover

 

afterwards.

4

To Power Outlet

 

Compact Power Adapter AC Cable

Attach the AC cable to the compact power adapter CA- CP100 and plug it into a power outlet.

29

Page 30
Image 30
Canon CDI-M113-010 manual Battery Usage, Using the Battery Pack CP-300 Only, „ Charging the Battery Pack in the Printer