Troubleshooting

If the printer does not seem to be working properly, run through the checks below to see if you can identify and correct the problem. If you are not able to solve the problem, please call your dealer or contact a Canon Customer Support help desk for assistance.

 

 

Problem

Cause

 

Solution

 

The printer has no power.

The compact power adapter or AC

Be sure that the compact power

 

 

 

cable is not correctly connected.

adapter and AC cable are

 

 

 

 

 

connected correctly. Be sure that

 

 

 

 

the AC cable is plugged into a

 

 

 

 

 

standard power outlet.

 

 

 

 

 

The printer’s indicator is blinking

There is a malfunction in the

Turn the printer’s power off and

red.

 

 

printer.

turn it on again.

 

 

 

 

 

 

 

The

 

(Direct Print) mark does

The cable is not correctly

Connect the cable correctly (

p.

 

not display in the upper left

connected.

26).

 

 

corner of the LCD monitor.

 

 

 

 

The printer’s power is off.

Turn the printer’s power on (

p.

 

 

 

 

 

 

 

26).

 

 

 

 

 

 

 

 

 

 

 

Your camera’s firmware is

Please check the Canon BeBit

 

 

 

 

incompatible with this printer.

website or your regional Canon

 

 

 

 

 

website.

 

 

 

 

 

 

 

 

 

The printer is connected to a

Wait until the print outputted by

 

 

 

computer and printing is in

the computer is complete.

 

 

 

 

progress.

 

 

 

 

 

 

 

 

The printer does not print.

The printer is not correctly

Connect the cable correctly (

p.

 

 

 

connected to the camera.

26). If the connection is correct,

 

 

 

 

the

icon will appear on the

 

 

 

 

 

camera’s LCD monitor.

 

 

 

 

 

 

 

 

 

The camera’s batteries are

Replace with fully charged (fresh)

 

 

 

depleted.

batteries, or plug the camera into

 

 

 

 

a power outlet (using the

 

 

 

 

 

camera’s optional compact power

 

 

 

 

adapter).

 

 

 

 

 

 

 

 

 

The printer’s battery pack is

Use a fully charged battery pack

 

 

 

depleted. (CP-300 only)

or use the printer’s compact

 

 

 

 

 

power adapter.

 

 

 

 

 

 

 

 

 

 

The ink cassette is not loaded

Load the ink cassette correctly.

 

 

 

 

correctly.

(

p. 22)

 

 

 

 

 

 

 

 

 

 

Too muck slack in the ink

Take up the slack.

 

 

 

 

cassette’s ink sheet.

 

 

 

 

 

 

 

 

 

 

 

The paper cassette is not pushed

Load the paper cassette correctly.

 

 

 

all the way in.

(

p. 25)

 

 

 

 

 

 

 

 

 

The printer has overheated.

Wait for the printer to cool down.

 

 

 

 

 

Printing stopped midway.

The printer is not correctly

Connect the cable correctly. (

 

 

 

 

connected to the camera.

p. 26)

 

 

 

 

 

 

 

 

34

Page 35
Image 35
Canon CDI-M113-010 manual Troubleshooting