Canon 3508B001, D10BLU Check the edited movie., Save the edited movie.

* Editing
100
Even if you move to a point other than a
point, only the portion from the
nearest to the left will be trimmed
when is selected. Only the portion
from the nearest to the right will be
trimmed when is selected.
●The section selected with will be the
section of the movie that remains after
editing.
Check the edited movie.
●Press the op buttons to select (Play),
then press the m button. The edited
movie will play.
●To edit the movie again, repeat Step 2.
● To cancel editing, press the op buttons,
and select . After pressing the m
button, press the qr buttons to select [OK],
and press the m button.
Save the edited movie.
●Press the op buttons to select , then
press the m button.
●Press the qr buttons to select [New File],
then press the mbutton.
The movie will be saved as a new file.
•When [Overwrite] in Step 4 is selected, the unedited movie is overwritten
with the edited movie, erasing the original movie.
•When there is not enough space left on the memory card, only
[Overwrite] can be selected.
•If the battery is depleted partway through editing, the edited movie clips
may not be saved. When editing movies, you should use a fully charged
battery or the separately sold AC adapter kit (pp.40, 140).
(EC256)_CDI-E404_Guide_E.book Page 100 Friday, February 6, 2009 7:44 PM
COPY