64
The self-timer can be used to shoot a group photo that includes the camera
operator. The camera will activate approximately 10 seconds after the
shutter button is pressed.

Press the p button.

Select Ò.

●Press the op buttons to select Ò, then
press the m button.
Once set, Ò will appear.
Shoot.
●Press the shutter button halfway to focus
on the subject, then press it fully. To
cancel shooting after the self-timer has
already started, press Q.
When the self-timer starts, the lamp blinks
and the self-timer sound plays.
Two seconds before the shutter releases,
the lamp and sound speed up (the lamp
remains lit when the flash will fire).
●To restore the original setting, select
in Step 2.
Ò Using the Self-Timer
You can change the delay time and number of shots (p.77).
(EC256)_CDI-E404_Guide_E.book Page 64 Friday, February 6, 2009 7:44 PM
COPY