AE Lock/Exposure Shift
97

Image Quality Table

Estimated Shooting Time

You can set the exposure or change it in 1/3 steps within a range of ±2.
Focus.
Press the shutter button halfway to focus.
Lock the exposure.
Press the o button to lock the exposure.
The exposure shift bar appears.
Press the
o
button again to release the lock.

Change the exposure.

While watching the screen, press the qr
buttons to adjust the brightness.
Shoot.
Image Quality
(Recording Pixels/Frame Rate) Content
640 × 480 pixels, 30 frames/sec. For shooting standard quality movies.
320 × 240 pixels, 30 frames/sec.
Since the number of the recording pixels is
smaller, the image quality will be lower than with
, but you can record three times the length.
Image Quality
(Frame Rate)
Shooting Time
2 GB 8 GB
23 min. 49 sec. 1 hr. 35 min. 11 sec.
1 hr. 13 min. 10 sec. 4 hrs. 52 min. 24 sec.
Based on Canon’s testing standards.
Recording will automatically stop when either the clip file size reaches 4 GB or the
recording time reaches approximately 1 hour.
Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 4 or higher memory cards are recommended.
AE Lock/Exposure Shift
(EC256)_CDI-E404_Guide_E.book Page 97 Friday, February 6, 2009 7:44 PM
COPY