Inserting the Battery and Memory Card
19

Close the cover.

Press the cover closed as shown in the
figure until it clicks into place.
Be sure the lock has returned to the
correct position as shown in the figure.
Removing the Battery and Memory Card

Remove the battery.

Open the cover and press the battery lock
in the direction of the arrow.
The battery will pop up.

Remove the memory card.

Push the memory card in until you hear a
click, then slowly release it.
The memory card will pop up.
Do not open the covers when the camera is wet or submerged in water.
If the camera is wet, wipe it off with a soft, dry cloth until it is completely
dry.
Be sure that the waterproof seals and the areas around them are kept
free from scratches and foreign objects such as sand, dirt, or hair. Not
doing so may result in leaks (pp.18, 30).
Avoid opening and closing the covers while on the beach or near water.
Change memory cards and batteries in a dry place protected from sea
breezes.
(EC256)_CDI-E404_Guide_E.book Page 19 Friday, February 6, 2009 7:44 PM
COPY