77
You can set the time delay (0 – 30 seconds) and the number of shots taken
(1 – 10 shots).

Select $.

●After pressing the p button, press the
op buttons to select $, then
immediately press the n button.

Select the settings.

●Press the op buttons to select [Delay] or
[Shots].
●Press the qr buttons to select a value,
then press the m button.
●Follow Step 3 in “Ò Using the Self-Timer”
(p.64) to shoot.
•Exposure and white balance settings are set with the first shot.
•When you set the time delay for more than 2 seconds, the self-timer lamp and
sound speed up 2 seconds before the shutter releases (when the flash will fire,
the lamp lights).
You can use a TV to display the camera screen content.
•Connect the camera to a TV as described in “Viewing Images on a TV”
(p.109).
•Shooting procedures are the same as when using the camera’s monitor.
$ Customizing the Self-Timer

What if the number of shots is set to two or more shots?

•If the flash fires, the shooting interval may be longer.
•If you set a high number of shots, the shooting interval may be longer.
•If the memory card becomes full, shooting stops automatically.
Shooting Using a TV Monitor
(EC256)_CDI-E404_Guide_E.book Page 77 Friday, February 6, 2009 7:44 PM
COPY