Getting Started

Preparations
E
23
3Fasten the grip belt.
Adjust the grip belt so that you can
reach the zoom lever with your index
finger, and the start/stop button with
your thumb.

The Wireless Controller

Inserting the Battery

(Lithium Button Battery
CR2025)
1Press the tab in the direction of the
arrow and pull out the battery
holder.
2Place the lithium button battery with
the + side facing up.
3Insert the battery holder.

Using the Wireless Controller

Point the controller at the camcorder’s
remote sensor when you press the
buttons.
NOTES
The wireless controller may not work properly
when the remote sensor is situated under
strong light sources or direct sunlight.
If the wireless controller does not work, check
that [WL.REMOTE] is not set to [OFF ]
(42).
When the camcorder cannot be operated with
the wireless controller, or when it can only be
operated at a very close range, replace the
battery.

Adjusting the LCD Screen

Rotating the LCD Panel

Open the LCD panel 90 degrees.
• You can rotate the panel 90 degrees
downward.
• You can rotate the panel 180 degrees
toward the lens (allowing the subject to
monitor the LCD screen while you use the
viewfinder). Rotating the panel 180
degrees is also useful if you wish to
include yourself when recording with the
self timer.
Tab
180°
90°
Subject can monitor the LCD screen
D115_NTSC-E.book Page 23 Friday, June 9, 2006 5:29 PM