Playback
Basic Functions
E
35

Adjusting the Volume

The camcorder plays the sound with the
built-in speaker. The volume will be
muted when you close the LCD panel.
1Press .
2Select ( ) [SYSTEM SETUP] and
press ( ).
3Select ( ) [VOLUME] and press
().
4Adjust ( ) the volume as desired
and press ( ).
To turn off the volume completely,
keep pressing ( ) until the volume
icon changes to .
5Press to save the setting and
close the menu.

Viewing Still Images

1Move the power switch to ON, then
slide it down towards MODE and
release it to set the camcorder in
PLAY mode.
The green PLAY indicator will turn on.
2Move the / switch to the
(Still images) position.
3If necessary, change the media for
the still images.
Refer to Selecting the Media for the
Still Images ( 32).
4Use the multi selector ( ) to
move between images.
IMPORTANT
The following may not be displayed correctly.
- Images not recorded with this camcorder.
- Images edited on or uploaded from a
computer (except for the sample images for the
Card Mix function).
- Images whose file names have been
changed.
Avoid the following actions while the disc/card
access display ( or ) appears on
screen, and when either the DISC access or
CARD access indicator is on or flashing. Failing
to do so may result in permanent data loss.
- Do not subject the camcorder to vibrations or
strong impacts.
( 13)
SYSTEM SETUP
VOLUME
MENU
( 27)
Speaker
MENU
MENU
( 13)
D115_NTSC-E.book Page 35 Friday, June 9, 2006 5:29 PM