Trouble?
95
Additional Information
E
REACHED THE MAXIMUM
NUMBER OF SCENES
The maximum number of scenes has been reached. Delete some
recordings (DVD-RW in VR mode) to free some space or replace
the disc.
25
63
CANNOT PLAY DISC The disc is dirty or you attempted to play back a disc type not
supported (not DVD-R/RW).
–
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
102
CANNOT EDIT DISC There are no scenes to edit or the recording is damaged. –
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
102
CANNOT DIVIDE THE
SCENE
Photomovie scenes cannot be divided. 68
You may not be able to divide very short scenes. –
Scenes cannot be divided when the disc already contains 999
scenes.
–
You may not be able to further divide scenes shorter than 5
seconds that were created by dividing a previous scene.
–
PLEASE USE ONLY THE
RECOMMENDED DISCS
The dual layered disc you inserted cannot be used with this
camcorder.
8
DISC IS FINALIZED
CANNOT RECORD
You cannot record additional scenes on a finalized DVD-R/
DVD-R DL disc.
–
You cannot record additional scenes or unfinalize a DVD-RW disc
in VIDEO mode that was finalized with another digital device.
–
UNFINALIZE THE DISC You cannot record additional scenes or convert still images to a
Photomovie scene on a finalized DVD-RW in VIDEO mode.
Unfinalize the disc first.
72
DISC IS PROTECTED The disc is protected. Replace the disc or remove the disc
protection.
65
CANNOT READ THE DISC
CHECK THE DISC
Disc could not be read. Try cleaning it or replace the disc. 100
This message can also appear if the camcorder has exceeded its
operational temperature. Disconnect the power adapter and
remove the battery and let the camcorder cool down before
resuming use.
–
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
102
The disc may not be loaded correctly. Try removing the disc and
reinserting it.
25
• ACCESS ERROR
• DISC ACCESS FAILURE
CHECK THE DISC
There was an error when reading the disc or attempting to write
onto it. Try cleaning the disc or replace it.
100
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
102
The disc may not be loaded correctly. Try removing the disc and
reinserting it.
25
DISC COVER IS OPEN Verify the disc is correctly inserted and close the disc cover. 25
Message Explanation
D115_NTSC-E.book Page 95 Friday, June 9, 2006 5:29 PM