Menu Options Lists
42
[DEUTSCH], [ENGLISH], [ESPAÑOL],
[FRANÇAIS], [ITALIANO], [POLSKI],
[ ], [ ], [ ], [ ],
[ ], [ ]
[ON], [ OFF]
The demonstration mode displays the
camcorder’s main features. It starts
automatically when the camcorder is
powered with the power adapter if you
leave it turned on without loading a
recording media for more than 5 minutes.
To cancel the demo mode once it
started, press any button, turn off the
camcorder or load a recording media.
System Setup (Volume, Beep, Media Select , etc.)
SYSTEM SETUP
[ CARD], [ DISC]
[ON], [ OFF ]
Allows the camcorder to be operated with
the wireless controller.
[HIGH VOLUME],
[ LOW VOLUME], [ OFF]
A beep will accompany some operations
like turning on the camcorder, the self-
timer countdown, etc. It also serves as a
warning beep under unusual conditions.
[ON], [ OFF]
In order to save power when the
camcorder is powered by a battery pack,
it will automatically shut off if left without
any operation for five minutes.
Approximately 30 seconds before the
camcorder shuts off, the message
AUTO POWER OFF” will appear.
[ RESET], [ CONTINUOUS]
Select the image numbering method to be
used on a new memory card or disc.
Images are automatically assigned
consecutive image numbers from 0101 to
9900, and stored in folders containing up
to 100 images. Folders are numbered
from 101 to 998.
[ RESET]: Image numbers will restart
from 101-0101 every time you insert a
new memory card or disc.
[ CONTINUOUS]: Image numbers will
continue from the number following that
of the last image recorded with the
camcorder.
If the recording media you insert
already contains an image with a larger
number, a new image will be assigned a
LANGUAGE
( 28)
DEMO MODE
MEDIA SEL.
( 32)
WL.REMOTE
VOLUME
( 35)
BEEP
POWER SAVE
FILE NOS.
D115_NTSC-E.book Page 42 Friday, June 9, 2006 5:29 PM