Playback
36
- Do not open the disc cover or the memory
card slot cover and do not remove the disc or
memory card.
- Do not disconnect the power source or turn off
the camcorder.
- Do not change the position of the /
switch or the operating mode.
Slideshow
1Press .
2Select ( ) [ SLIDESHOW] and
press ( ).
3Select ( ) [START] and press
().
• Images are played back one after
another.
• Press to stop the slideshow.
Index Screen
1Move the zoom lever toward W.
The still images index screen appears.
2Select ( , ) an image.
• Move the cursor to the image
you want to view.
• Press or on the camcorder
( or on the wireless
controller) to move to the next/previous
index page.
3Move the zoom lever toward T.
The index screen closes and the
selected image is displayed.
Image Jump Function
You can also quickly locate a specific
image without having to browse all of
them one by one.
Push the multi selector ( ) and
keep it pressed down.
Image numbers will quickly run in
sequence. When you release the multi
selector the image corresponding to the
number selected will be displayed.

Magnifying the Still Image

During playback, still images can be
magnified up to 5 times.
1Move the zoom lever toward T.
• The image is magnified by 2 times
and a frame appears indicating the
position of the magnified area.
• To further enlarge the image, move
the zoom lever toward T. To reduce the
magnification to less than 2 times,
move the zoom lever toward W.
will appear for images that cannot
be enlarged.
2Select the part of the image to be
magnified with the multi selector.
• Move ( , ) the frame to the part
of the image you want to see enlarged.
• To cancel the magnification, move
the zoom lever toward W until the
frame disappears.
SLIDESHOW
FUNC.
( 27)
FUNC.
FUNC.

+-

NEXT
PREV.
( 13)
Zoom lever
Multi selector
D115_NTSC-E.book Page 36 Friday, June 9, 2006 5:29 PM