Erasing a Photo Right After Recording It
You can erase the still image recorded last while reviewing it within the time set for the [REVIEW] option (or immediately after recording it, if [REVIEW] is set to
[ 
OFF]).
( 
21)
While reviewing the still image immediately after recording:
1Push the joystick (
) toward 
.
2Select (
) [ERASE] and press
.
Basic Playback
Viewing Photos
(
21)
1Move the 
/
switch to 
(still images).
2Turn the 
switch to ON, then turn it toward MODE and release it to set the camcorder in PLAY mode.
The green PLAY indicator will turn on.
3Push the joystick (
) to move between still images.
Push the joystick (
) and hold it down to run quickly through the still images.
Image Jump Function
When you have recorded a large number of still images, you can jump 10 or 100 images at a time.
Photos • 53