NO DISC

-There is no disc in the camcorder. Insert a

disc ( 25).

-This message can also appear if condensation has formed. Wait until the camcorder dries completely before

resuming use ( 84).

NO IMAGES

There are no still images on the memory card.

PRINT ORDER ERROR

-You attempted to set more than 998 still

images in the print order ( 61).

REACHED THE MAXIMUM NUMBER OF SCENES

-The maximum number of scenes has been reached. Delete some recordings (DVD-RW in VR mode) to free some space

( 35) or replace the disc.

RECOVERING DATA PLEASE WAIT…

-Data on the disc is being recovered. Wait until this message disappears before resuming use.

TASK IN PROGRESS DO NOT DISCONNECT THE POWER SOURCE

-The camcorder is updating important file allocation data on the disc. Do not disconnect the compact power adapter or remove the battery pack under any circumstances.

• TEMPERATURE TOO HIGH

CANNOT

RECORD

 

• TEMPERATURE TOO HIGH

CANNOT

REMOVE DISC

 

-The camcorder has exceeded its operational temperature. Disconnect the compact power adapter and remove the battery pack. Let the camcorder cool down before resuming use.

TOO MANY STILL IMAGES DISCONNECT USB CABLE

-Disconnect the USB cable. Try using a memory card reader or decrease the number of still images on the memory card (Windows: fewer than 1,800 still images, Macintosh: fewer than 1,000 still images). If a dialog box appeared on the computer screen, close it and then reconnect the supplied USB cable.

UNABLE TO RECOGNIZE THE DATA

-The disc may not be recognized by this camcorder if it was initialized with a different device.

-You inserted a disc recorded in a different television system (PAL or SECAM).

UNABLE TO RECOVER DATA

-Could not recover a corrupted file.

-This message can also appear if condensation has formed. If you suspect condensation is the reason, do not initialize the disc and wait until the camcorder dries completely before

resuming use ( 84).

UNFINALIZE THE DISC

-You cannot record additional scenes on a finalized DVD-RW in VIDEO mode.

Unfinalize the disc first ( 49).

USE OF A RECOMMENDED DISC IS ADVISED

-The disc can be used but performance is not guaranteed. We recommend that you use a disc whose performance has been

tested with this camcorder ( 7).

Direct Print Related Messages

About Canon PIXMA/ SELPHY DS Printers: If the printer’s error indicator flashes or an error message appears on the printer’s operation panel, refer to the printer’s instruction manual.

CANNOT PRINT!

-You attempted to print a still image that was recorded with another camcorder, has a different compression, or was edited on a computer.

COMMUNICATION ERROR

-The printer is experiencing a data transfer error. Cancel printing. Disconnect the USB cable and turn off the printer. After a while, turn the printer back on and reconnect the supplied USB cable.

78 • Additional Information