Canon DC410, DC420 Print Orders, IMPORTANT, PRINT ERRORS, TO CANCEL THE PRINTING, 1 Press while printing, 2 Select ( ) [OK] and press, WHEN YOU HAVE FINISHED PRINTING

TO CANCEL THE PRINTING

1 Press while printing.

2 Select ( ) [OK] and press .

WHEN YOU HAVE FINISHED PRINTING

Disconnect the cable from the camcorder and printer and turn off the camcorder.

PRINT ERRORS

If an error occurs while printing, an error message (for example, [NO PAPER]) will appear on the camcorder’s screen. Solve the problem referring to the error message

list ( 78) and to the printer's instruction manual.

•Canon's PictBridge-compatible printers: If printing does not resume automatically

after you solved the problem, select

[CONTINUE] and press to resume printing. If that option is not available,

select [STOP] and press and then restart printing from the beginning.

•Other printers or if the error still persists with a Canon printer: If printing does not resume automatically, disconnect the USB cable and turn off the camcorder. After a short while, turn on the camcorder and restore the USB connection.

IMPORTANT

•You may not be able to print correctly with a PictBridge-compatible printer still images whose file names have been changed or that were recorded, created, edited or changed with any device other than this camcorder.

•Observe the following precautions while printing:

-Do not turn off the camcorder or the printer.

-Do not change the position of the

/ switch.

-Do not disconnect the USB cable.

-Do not open the memory card slot cover and do not remove the memory card.

•If [BUSY] does not disappear, disconnect the USB cable and restore the connection after a short while.

Print Orders

You can mark in advance the still images you want to print and set the desired number of copies as a print order. Later, you can easily print out the print orders in one of the following ways:

-Insert the memory card into the memory card slot of a DPOF-compatible printer. Refer to printer’s instruction manual for the correct procedure.

- Connect the camcorder directly to a PictBridge-compatible

printer ( 58).

You can set print orders for up to 998 still images.

( 21)

Selecting Still Images for Printing (Print Order)

Set the print orders before connecting the supplied USB cable to the camcorder.

FUNC. [ PRINT ORDER]

: The image selection screen appears.

FROM THE IMAGE SELECTION SCREEN

1Select ( ) the still image you want to mark with a print order.

2Press to set the print order. The number of copies appears in orange.

Photos • 61