-This message can also appear if condensation has formed. Wait until the camcorder dries completely before

resuming use ( 84).

CANNOT READ THE DISC CHECK THE DISC

-Disc could not be recognized. Try cleaning

it ( 81) or replace the disc.

-This message can also appear if the camcorder has exceeded its operational temperature. Turn off the camcorder and let it cool down before resuming use.

-This message can also appear if condensation has formed. Wait until the camcorder dries completely before

resuming use ( 84).

-The disc may not be loaded correctly. Try removing the disc and reinserting it

( 25).

CANNOT RECORD

-There is a problem with the disc.

-This message can also appear if condensation has formed. Wait until the camcorder dries completely before

resuming use ( 84).

-The disc’s recording surface may be dirty or scratched.

-This message may appear when the camcorder is repeatedly subjected to vibrations.

CANNOT USE DISC USE OF A RECOMMENDED DISC IS ADVISED

-The disc cannot be used. We recommend that you use a disc whose performance has been tested with this camcorder

( 7).

CARD ERROR

-A memory card error occurred. The camcorder cannot record or display the image. The error may be temporary. If the message disappears after 4 seconds and appears in red, turn the camcorder off, remove the card and reinsert the card. If changes to green, you can resume recording/playback.

CARD FULL

-The memory card is full. Erase some still

images ( 55) to free some space or replace the memory card.

CHANGE THE BATTERY PACK

-The battery pack is exhausted. Replace or

charge the battery pack ( 18).

DISC ACCESS FAILURE CHECK THE DISC

-There was an error when reading the disc or attempting to write onto it. Try cleaning

the disc ( 81) or replace it.

-This message can also appear if condensation has formed. Wait until the camcorder dries completely before

resuming use ( 84).

-The disc may not be loaded correctly. Try removing the disc and reinserting it

( 25).

DISC COVER IS OPEN

-Verify the disc is correctly inserted and

close the disc cover ( 25).

DISC FULL

-The disc is full (“ END” appears on the screen). Delete some recordings (DVD-RW

in VR mode) to free some space ( 35) or replace the disc.

DISC IS FINALIZED CANNOT RECORD

-You cannot record additional scenes on a finalized DVD-R/DVD-R DL disc.

-You cannot record additional scenes or unfinalize a DVD-RW disc in VIDEO mode that was finalized using another digital device.

DISC MUST BE FINALIZED ( MODE) TO PLAY BACK IN COMPATIBLE PLAYERS

-Be sure to finalize the disc and check the compatibility of the device before playing back the disc on external DVD devices

( 48).

LOADING THE DISC

-The disc is being recognized. Wait before you start recording.

NAMING ERROR

-The folder and file numbers have reached their maximum value. Set

[IMG NUMBERS] to [RESET] and erase all

the images on the memory card ( 55)

or initialize it ( 57).

NO CARD

-There is no memory card in the camcorder

( 27).

Additional Information • 77