1Press to display the joystick guide.

2 Push the joystick ( ) toward .

3Select () [ JUMP 10 IMAGES]

or [ JUMP 100 IMAGES].

4Jump ( ) the number of images

selected and press .

Press again to hide the joystick guide.

Index Screen

1Move the zoom lever toward W. The still images index screen appears.

2Select (, ) an image.

•Move the green selection frame to the image you want to view.

•When you have recorded a large number of still images, you may find it easier to browse entire index pages instead. Move the zoom lever toward W to extend the green selection frame to the whole page,

and move ( ) between index pages. Move the zoom lever toward T to return to moving between single images.

3 Press .

The index screen closes and the selected image is displayed.

IMPORTANT

•Observe the following precautions while

the card access display ( ) appears on screen, and while the CARD access indicator is on or flashing. Failing to do so may result in permanent data loss.

-Do not subject the camcorder to vibrations or strong impacts.

-Do not open the memory card slot cover and do not remove the memory card.

-Do not disconnect the power source or turn off the camcorder.

-Do not change the position of the

/ switch or the operating mode.

•The following may not be displayed correctly.

-Images not recorded with this camcorder.

-Images edited on a computer.

-Images whose file names have been changed.

Magnifying Photos during Playback

During playback, still images can be

magnified up to 5 times. will appear for images that cannot be enlarged.

( 21)

1Move the zoom lever toward T.

•The image is magnified by 2 times and a frame appears indicating the position of the magnified area.

54 • Photos