Canon DC410, DC420 79

-You attempted to print from a memory card that contains a large number of still images. Reduce the number of still images.

COULD NOT PRINT X IMAGES

-You attempted to use the print order settings to print X images that were recorded with another camcorder, with a different compression or were edited on a computer.

FILE ERROR

-You attempted to print an image that was recorded with another camcorder, has a different compression, or was edited on a computer.

HARDWARE ERROR

-Cancel printing. Turn off the printer and turn it back on. Check the printer status. If the printer is equipped with a battery, it might be exhausted. In such case, turn off the printer, replace the battery and turn it back on.

-Ink tank errors have occurred. Replace the ink tank.

INCOMPATIBLE PAPER SIZE

-The paper settings of the camcorder conflict with the printer’s settings.

INK ABSORBER FULL

-Select [CONTINUE] to resume printing. Consult a Canon Service Center (refer to the list included with the printer) to replace the ink absorber.

INK ERROR

-There is a problem with the ink. Replace the ink cartridge.

LOW INK LEVEL

-The ink cartridge needs to be replaced soon. Select [CONTINUE] to restart printing.

NO INK

-The ink cartridge is not inserted or is out of ink.

NO PAPER

-Paper is not correctly inserted or there is no paper.

NO PRINTHEAD

-No print head is installed in the printer or the print head is defective.

PAPER ERROR

-There is a problem with the paper. The paper is not correctly loaded or the paper size is wrong. Alternatively, if the paper output tray is closed, open it to print.

PAPER JAM

-The paper jammed during printing. Select [STOP] to cancel printing. After removing the paper, set some paper again and retry printing.

PAPER LEVER ERROR

-Paper lever error occurred. Adjust the paper selection lever to the proper position.

PRINT ERROR

-Cancel printing, disconnect the USB cable and turn off the printer. After a while, turn the printer back on and reconnect the supplied USB cable. Check the printer status.

PRINTER COVER OPEN

- Close the printer cover securely.

PRINTER ERROR

-A malfunction has occurred that may require repairs. (Canon PIXMA printers: the printer's green power lamp and orange error lamp flash alternately.)

-Disconnect the USB cable and turn off the printer. Unplug the printer's power cord from the power outlet and contact the appropriate customer support center or service center.