Installation Procedure
The procedure for installing the scanner is outlined below. (For a detailed outline of this procedure, see “Connecting the Scanner to Your PC” at the end of this section.)
1.Check the interface board in your computer.
(See “Interface Boards” on p.18)
↓
2.Connect the scanner to the PC.
(See “Connecting the Scanner to Your PC” on p.19)
↓
3.Connect the power cord to the scanner.
(See “Connecting the Power Cord” on p.22)
↓
4.Turn the scanner on first, and then start up the PC.
(See “Turning the Power On” on p.23)
↓
5.Let the PC recognize the Scanner.
(See “Recognizing the Scanner” on p.23)
↓
6.Turn the scanner off. (See “Turning the Power Off” on p.25)
Installing the Scanner | 17 |