Connecting via USB
USB interface connection
•Be sure to use the USB cable bundled with the scanner or a Hi-Speed USB 2.0-compatible cable.
•When using a USB extension board that supports Hi-Speed USB 2.0, be sure to choose one verified for use with the scanner.(See “USB 2.0 Interface Board” on p.18)
DR-3080CII
USB Cable
Computer
Flat-Shaped Connector | Smaller Square- |
|
| Shaped Connector |
IMPORTANT
●If the OS you are using is Windows NT, the connection via USB is not supported. When using the DR-3080CII with Windows NT, be sure to connect the scanner via SCSI.
●When using a USB hub, be sure to use one compatible with USB 2.0.
Note
●The DR-3080CII passed the Hi-Speed USB 2.0 certification test. However, when you use the scanner with a personal computer equipped with USB 2.0 as standard, the scanner may not always operate normally.
●If the interface is not Hi-Speed USB 2.0-compatible, the scanning speed will slow down.
