4.3 Document Feeding and Scanning
◆Standard Feeding
To use the standard feeding mode, instruct the scanner to start from the application.
1 Select [Standard Feeding] in [Feeding Option] on the ISIS/TWAIN driver’s settings screen.
2 Place the document onto the scanner.
ENGLISH
See “Placing Documents onto the Scanner,” on page 48 for information about placing
Important | documents onto the scanner. |
|
3 From the application you are using, execute the required command to start scanning.
This starts scanning.
4 When scanning of the document is complete, the application goes into the Ready Mode.
If paper feeding stops during scanning due to a system error or paper jam, make sure that the last page of the document was recorded properly before continuing to scan.
Note
55
