Chapter 1 Getting Ready
Part Names
This section describes the names and functions of each part. Before you connect the
Feeder
qFeeder Cover
Open this cover to clear document jams and clean the rollers. (See pp. 77, 90.)
wOpening Lever
Operate this release lever when opening or closing the feeder cover.
eDocument Set Indicator
This indicator lights when there is a document in the document feeder tray. (See p. 49.)
rSlide Guide
Adjust this guide to the marking on the document size label that indicates the applicable document size. (See p. 48.)
tDocument Feeder Tray
Load documents to be scanned here. (See p. 49.)
yDocument Eject Tray
Scanned documents are ejected here. Raise the document feeder tray to remove ejected documents. (See p. 50.)
uOperation Panel (See p. 19.)
16