Canon 2011B002, EOS-1 DS 4 Set the printing effects

wPrinting

	4 Set the printing effects.
	Set as necessary. If you need not set
	any printing effects, go to step 5.
	Turn the <5> dial to select the item
	on the upper right, then press <0>.
	If the <e> icon is displayed next to
	<z>, the printing effects can also
	be adjusted. (p.144)
	Next, turn the <5> dial to select the
	desired printing effect, then press <0>.
Item	Description
EOff	Same as the printing characteristics turned “On”. No automatic
	correction will be performed.
EOn	The image will be printed according to the printer’s standard colors.
	The image’s Exif data is used to make automatic corrections.
EVivid	The image will be printed with higher saturation to produce
	more vivid blues and greens.
ENR	The image noise is reduced before printing.
0B/W	Prints in black-and-white with true blacks.

0Cool tone Prints in black-and-white with cool, bluish blacks.

0Warm tone Prints in black-and-white with warm, yellowish blacks.

zNatural	Prints the image in the actual colors and contrast. No automatic
	color adjustments will be applied.
zNatural M	The printing characteristics are the same as the “Natural” setting. However,
	this setting enables finer printing adjustments than with “Natural.”
EDefault	The printing will differ depending on the printer. For details, see
	the printer’s instruction manual.

*The screen display may differ depending on the printer.

*When you change the printing effects, it is reflected in the image displayed on the upper left. Note that the printed image might look slightly different from the displayed image which is only an approximation.

142