Replacing the Date/Time Battery

The date/time (back-up) battery maintains the camera’s date and time. Its service life is about 5 years. If the date/time is reset when the battery is replaced, replace the back-up battery with a new CR2025 lithium battery as described below.

The date/time setting will also be reset, so be sure to set the correct date/time.

1 Set the power switch to <2> and remove the battery pack.

The back-up battery is on the ceiling of the battery compartment.

2 Removecover. the back-up battery

Use a small screwdriver to loosen the screw and remove the cover.

Be careful not to lose the cover and screw.

3 Remove the battery.

(+)

4

 

5

Install a new back-up battery.

The plus side of the battery must face up.

Attach the cover.

For the date/time battery, be sure to use a CR2025 lithium battery.

188