Troubleshooting Guide

Shooting

No images can be shot or recorded.

The memory card is not properly inserted. (p.32)

If the memory card is full, replace the card or delete unnecessary images to make room.

Or if a not-full memory card is inserted in the other card slot, switch the recording to that card. (p.32, 73, 128)

If you try to focus in the One-Shot AF mode while the focus confirmation light <o> in the viewfinder blinks, a picture cannot be taken. Press the shutter button halfway again to focus, or focus manually. (p.36, 86)

The LCD monitor does not display a clear image.

If dust is adhering to the LCD monitor, wipe with a lens cloth or soft cloth.

In low or high temperatures, the LCD monitor display may seem slow or it might look black. It will return to normal at room temperature.

The image is out of focus.

On the lens, set the focus mode switch to <f>. (p.35)

To prevent camera shake, hold the camera still and press the shutter button gently. (p.36, 40)

The memory card is unusable.

If a memory card error message is displayed, see page 48 or 193.

191