Canon 2011B002, EOS-1 DS 7 Start printing, 6Set the number of copies, 5Set the date and file number imprinting

wPrinting

5Set the date and file number imprinting.

Set as necessary.

Turn the <5> dial to select <I>, then press <0>.

Turn the <5> dial to select the desired setting, then press <0>.

6Set the number of copies.

Set as necessary.

Turn the <5> dial to select <R>, then press <0>.

Turn the <5> dial to select the number of copies, then press <0>.

7 Start printing.

Turn the <5> dial to select [Print], then press <0>.

XThe printing will start.

You can also print RAW and sRAW images taken by the camera. With RAW+JPEG images, the RAW image will be printed. And with sRAW+JPEG images, the JPEG image will be printed.

For details on trimming, see page 145.

The [Default] setting for printing effects and other options are the printer’s own default settings as set by the printer’s manufacturer. See the printer’s instruction manual to find out what the [Default] settings are. Depending on the image’s file size and recording quality, it may take some time for the printing to start after you select [Print].

If image tilt correction (p.145) has been applied, it will take longer to print the image.

After the [Do not disconnect cable] message disappears, you can disconnect the cable even during printing.

To stop the printing, press <0> while [Stop] is displayed, then select [OK].

143