Troubleshooting Guide

The flash always fires at full output.

If you use a flash unit other than an EX-series Speedlite, the flash will always be fired at full output (p.120).

When the [Flash metering mode] flash Custom Function is set to

[TTL (autoflash)], the flash will always be fired at full output (p.124).

Flash exposure compensation cannot be set.

If flash exposure compensation has already been set with the Speedlite, flash exposure compensation cannot be set with the camera. When the Speedlite’s flash exposure compensation is canceled (set to 0), flash exposure compensation can be set with the camera.

High-speed sync cannot be set in the Av mode.

Set [8C.Fn I -15: Flash sync. speed in Av mode] to [0: Auto] (p.212).

Live View shooting is not possible.

For Live View shooting, use a memory card (a hard disk-type card is not recommended). A hard disk-type card requires a lower temperature range for operation than memory cards. If the temperature gets too high, the Live View shooting may stop temporarily to prevent damage to the card’s hard disk. When the camera’s internal temperature decreases, you can resume Live View shooting (p.139).

During Live View shooting, the ISO speed, shutter speed, and aperture cannot be set.

Set [LV z/kset.] to [Stills] (p.126).

The shutter makes two shooting sounds during Live View shooting.

During Live View shooting, the shutter will make two sounds when you take a picture (p.127).

252