114
Using AF to FocusN
2Select the AF point.
Press the <o > button, then
use <9> to select the AF point.
If you keep tilting <9> in the same
direction, it will toggle between
manual and automatic AF point
selection.
3Focus the subject.
Aim the AF point over the subject,
and hold down the <p> button.
XThe Live View image will turn off, the
reflex mirror will go back down, and
AF will be executed.
XWhen focus is achieved, the beeper
will sound and the Live View image
will reappear.
XThe AF point used to focus will be
displayed in red.
4Take the picture.
Check the focus and exposure, then
press the shutter button to take the
picture (p.110).
You cannot take a picture during autofocusing. Take the picture only
while the Live View image is displayed.
Autofocus will not work with the release button on Remote Switch
RS-80N3 and Timer Remote Controller TC-80N3 (both sold separately).