Canon EOS 5D instruction manual Trimming the Image, Press 0 to exit the trimming, 161

	wPrinting
Trimming the Image
Tilt correction	You can crop the image and print only
	the trimmed portion as if the image was
	recomposed. Do the trimming right
	before printing. If you set the trimming
	and then set the print settings, you may
	have to set the trimming again.

1 On the print setting screen, select [Trimming].

2 Set the trimming frame size, position, and proportion.

The image area within the trimming frame will be printed. The trimming frame’s vertical-to-horizontal proportion can be changed with [Paper settings].

Changing the trimming frame size

When you press the <u> or <I> button, the size of the trimming frame will change. The smaller the trimming frame, the larger the image magnification will be for the printing.

Moving the trimming frame

Use <9> to move the frame over the image vertically or horizontally. Move the trimming frame until it covers the desired image area or composition.

Rotating the frame

Each time you press the <B> button, the trimming frame will toggle between the vertical and horizontal orientations. This enables you to create a vertical-oriented print from a horizontal image.

Image tilt correction

By turning the <5> dial, you can adjust the image tilt angle by ±10 degrees in 0.5-degree increments. When you adjust the image tilt, the <O> icon on the screen will turn blue.

3 Press <0> to exit the trimming.

XThe print setting screen will reappear.

You can check the trimmed image area on the upper left of the print setting screen.

161