152

3Manual Sensor CleaningN

While cleaning the sensor, never do any of the following. Doing any of the following will cut off the power and close the shutter. The shutter curtains and image sensor might get damaged.

•Setting the power switch to <2>.

•Opening the battery compartment cover.

•Opening the card slot cover.

The surface of the image sensor is extremely delicate. Clean the sensor with care.

Use a plain blower without any brush attached. A brush can scratch the sensor.

Do not insert the blower tip inside the camera beyond the lens mount. If the power is turned off, the shutter will close and the shutter curtains or reflex mirror might get damaged.

Never use canned air or gas to clean the sensor. The blowing force can damage the sensor or the spray gas can freeze on the sensor.

Page 152

Image 152

Contents

English CF Card Testing the Camera Before Using and LiabilityCopyrights Item Check List Basic Assumptions Conventions Used in this ManualIcons in this Manual Chapters Contents Advanced Operations Image SettingsSetting the AF and Drive Modes Image Playback Sensor CleaningLive View Shooting and Movies Reference 153Customizing the Camera Index to Features Exposure adjustment Sensor cleaning Dust reductionShooting Flash Handling Precautions Camera Care LCD Panel and LCD Monitor Cards Insert the battery. p.26 Set the power switch toQuick Start Guide Attach the lens. p.31 Set the Mode Dial to 1 Full Auto. p.48 Focus the subject. p.35Take the picture. p.35 Review the picture. p.145 Nomenclature Nomenclature LCD Panel RAW Viewfinder Information Mode Dial Camera User Settings Fully-Automatic Modes Use of genuine Canon accessories is recommended EF 24-105mm f/4L is USM lens Battery Charger LC-E6E Battery Charger LC-E6Charger for Battery Pack LP-E6 p.24 Getting Started Attaching the Strap Charging the Battery Tips for Using the Battery and Charger If the battery has been recharged, attachWhen not using the camera, remove the battery Purchase a new battery Installing and Removing the Battery About Auto Power Off Turning on the PowerAbout the Automatic Self-Cleaning Sensor Checking the Battery Level Battery LifeTemperature At 23C / 73F At 0C / 32F Icon Level % Indication Insert the card Installing and Removing the CF CardInstalling the Card Open the cover Set the power switch to Make sure the access lamp is off, then open the coverRemoving the Card Open the cover Remove the card On the lens, set the focus mode switch to AF autofocus Attaching and Detaching a LensAttaching a Lens Remove the caps Attach the lens About Zooming Attaching a HoodTo zoom, turn the zoom ring on the lens with your fingers Turn the hood clockwise to attach it securely Set the is switch to About the Lens Image StabilizerPress the shutter button halfway Take the picture Basic Operation Holding the Camera Shutter Button Pressing halfwayPressing completely This releases the shutter and takes the picture Turn the 6 dial only 9Operating the Multi-controller Using the Quick Control Dial for Selecting Before using the 5 dial, set the power switch to JAfter pressing a button, turn the 5 dial Turn the 5 dial only Display the Quick Control screen 9Using the Quick Control ScreenSet the desired setting Function Setting Display Quick Control Screen Nomenclature F/a/FMenu Screen 3Menu OperationsFully-Automatic Modes 1/C Menu Screen Menu Setting Procedure Display the menu Select the settingSelect a tab Select the desired item Before You Start 3Formatting the Card Select FormatSelect OK Under the 5 tab, select Format, then press Set the desired time 3Set the Power-off Time/Auto Power OffTurn the 5 dial to select the setting, then press 3Reverting the Camera to the Default SettingsN Select Clear settingsShooting Settings Image-Recording Settings Turn the 5 dial to select OK, then press 3About Copyright InformationN Camera SettingsCamera Settings Basic Shooting About the Auto Lighting Optimizer Set the Mode Dial to 1Fully Automatic ShootingAim any AF point over Subject Focus confirmation light o blinks and focus is not achieved Sometimes multiple AF points flash simultaneously Shooting a Moving Subject 1Full Auto TechniquesRecomposing the Shot Set the Mode Dial to C When the picture is taken, the LCD monitor turns offCCreative Auto Shooting Press 9 straight down Adjusting the picture brightness Single, continuous, self-timer, and remote control shootingBlurring/sharpening the background Picture Style Image Settings 3Setting the Image-recording Quality Image-recording Quality Setting ExamplesSelect Quality Select the image-recording quality Guide to Image-recording Quality Settings Approx Quality Pixels Printing File Size Possible Maximum About RAW Maximum Burst During Continuous Shooting Setting the ISO SpeedN Press the m button Set the ISO speed Shooting Mode ISO Speed Setting About a Auto ISO SpeedISO Speed Guide ISO Speed Shooting Situation Flash Range ASelecting a Picture StyleN Press the a buttonSelect a Picture Style Picture Style Effects About the Symbols SymbolsNeutral Faithful Parameter Settings and Effects ACustomizing a Picture StyleNPress the a button Select a Picture Style Select a parameter LToning Effect Monochrome AdjustmentKFilter Effect ARegistering a Picture StyleN Press the a button Select User DefPress Select the base Picture Style Registering a Picture StyleN Setting the White BalanceN Display Mode Color Temperature Approx. K KelvinPress the n button Select the white balance About White Balance OCustom White Balance Photograph a white objectSelect Custom WB Press the n button PSetting the Color Temperature Set the color temperatureSelect White balance Under the 2 tab, select White balance, then press Set the white balance correction UWhite Balance CorrectionNWhite Balance Correction Set the white balance bracketing amount White Balance Auto BracketingBracketing Sequence 3Lens Peripheral Illumination Correction Select Peripheral illumin. correctUnder the 1 tab, select Peripheral illumin. correct., then press About the Lens Correction Data 3Creating and Selecting a Folder Create a Folder Select Select folderSelect Create folder Create a new folder Creating Folders with a Personal Computer Selecting a FolderAbout Folders 3File Numbering Methods ContinuousFile numbering after Replacing the card Auto Reset Manual Reset About Adobe RGB 3Setting the Color SpaceNSelect Color space Setting the AF Drive Modes Selecting the AF ModeN One-Shot AF for Still Subjects AI Servo AF for Moving Subjects AI Focus AF for Automatic Switching of AF Mode Selecting with the Multi-controller SSelecting the AF PointNSelect the AF point Selecting with the Dial With lenses whose maximum aperture is larger than f/2.8 Lens’ Maximum Aperture and AF SensitivityWith lenses whose maximum aperture is larger than f/5.6 When Autofocus Fails Subjects difficult to focus Single shooting Press the o button Select the drive modeISelecting the Drive ModeN JSelf-timer Operation Press the o button Select the self-timer10-sec. self-timer k 2-sec. self-timerN Look at the LCD panel and turn the 5 dial Advanced Operations Set the Mode Dial to d Focus the subject Program AECheck the shutter speed and aperture display Compose the shot and press the shutter button completely Differences Between d and 1 Full Auto About Program Shift Set the Mode Dial to s Set the desired shutter speed Shutter-Priority AECheckshoot. the viewfinder display While looking at the LCD panel, turn the 6 dial Shutter Speed Display Set the Mode Dial to f Set the desired aperture Aperture-Priority AE Depth of Field PreviewN Aperture Display Set the Mode Dial to a Manual ExposureSet the shutter speed Aperture Press the n button Select the metering mode QSelecting the Metering ModeN Setting Exposure CompensationN Set the exposure compensation amount Canceling AEB HAuto Exposure Bracketing AebnSelect Expo. comp./AEB Set the AEB amount Wre AAE LockNAE Lock Effects Bulb Exposures Ulcd Panel IlluminationWhile looking at the LCD panel, turn the 6 or 5 dial Elapsed exposure time will be displayed on the LCD panel Using the Eyepiece Cover Remove the eyecupAttaching the eyepiece cover 100 Mirror LockupN Press the shutter button completely again101 Mirror will swing up 102 RRemote Control ShootingPress the remote controller’s transmit button Using Non-EX-series Canon Speedlites DFlash PhotographyEOS-dedicated, EX-series Speedlites 103 Using Non-Canon Flash Units 104Sync Speed PC Terminal 3Setting the FlashN Flash Function Settings Select External Speedlite ControlSelect Flash function settings Set the flash function settings Flash C.Fn Settings Select Flash C.Fn settings Canceling Speedlite Custom Function SettingsTurn the 5 dial to select Flash C.Fn settings, then press 106 107 About Remote Live View Shooting Set the shooting mode Select LV func. settingSelect the Live View function settings type APreparing for Live View ShootingN 109 About Screen settingsDisplay the Live View image ShootingN Use AF to focusOperations During Live View Display 110 111 About the E icon About the Information Display112 Using AF to FocusN Selecting the AF ModeQuick Mode AF point 1 Display the Live View image 114 115 Live ModeMove the AF point Press the p button to focus the face covered by the p frame LiveuFace Detection Mode116 AF operation Live Mode and LiveuFace Detection Mode Notes117 Shooting conditions which can make focusing difficult 118 Focusing ManuallyN Set the lens focus mode switch toMoving the magnifying frame Focus manually Disable Silent ShootingN120 Mode Enable movie shooting Menu procedure is the same as onKShooting Movies Selectset. Live View/Movie func Movie Shooting Time Focus the subject Start shooting the movieStop shooting the movie About the Screen Recording and Image Quality Taking Still Photos During Movie Shooting123 124 Recording and Image QualityExposure Playback and Connection to TV 125 About SoundDisplay and Operating the Camera Live View Shooting Cautions for Stills and Movies 126 127 About images taken with another camera XImage Playback Single Image Display Playback the imageSelect the image Exit the image playback BShooting Information Display 129About the Highlight Alert About the AF Point Display 130 About the HistogramBrightness Display RGB Display 131 XSearching for Images QuicklyHDisplay Multiple Images on One Screen Index display IJump through Images Jump display Select the jump methodBrowse by jumping 132 YMagnified View Magnify the imageScroll around the image 133 BRotating the Image Select RotateRotate the image 134 3Auto Playback Slide Show Select Slide showFolder/Date 135 Set the playback time and repeat option Start the slide showQuit the slide show 136 KPlaying Movies Select a moviePlayback the movie 137 138 Viewing the Images on TV Viewing on Non-HD High-Definition TV SetsConnect the provided stereo video cable to the camera 139 Viewing on HD High-Definition TV Sets Connectcamera. the Hdmi cable to140 Hdmi Cable HTC-100 sold separately is required KProtecting Images Select Protect imagesSelect the image and protect it 141 LErasing Images Erase the image3Checkmarking X Images to be Erased in a Batch Select Erase images 3Erasing All Images in a Folder or Card 143 Changing Image Playback Settings 3Adjusting the LCD Monitor BrightnessAdjust the brightness Select LCD brightness 3Setting the Image Review Time Select Review time145 Under the 1 tab, select Review time, then press 3Auto Rotate of Vertical Images Select Auto rotateSet the auto rotate 146 Sensor Cleaning 147 FAutomatic Sensor Cleaning Cleaning the Sensor NowSelect Clean nowf Disabling Automatic Sensor Cleaning 3Appending Dust Delete DataN PreparationObtain the Dust Delete Data Select Dust Delete Data 149 About the Dust Delete Data 150 3Manual Sensor CleaningN Select Sensor cleaningSelect Clean manually End the cleaning 152 Digital Print Order Format Dpof p.163 153Printing p.154 Direct printing procedure is done entirely with the camera Preparing to Print154 While looking at the LCD monitor 155 Press the x buttonIcon will appear on the upper left to To a printer Select Paper settings WPrintingSelect the image to be printed 156 QSetting the Paper Size YSetting the Paper TypeUSetting the Page Layout 157 Set the printing effects 158Screen display may differ Depending on the printer 159 Set the date and file number imprintingStart printing EAdjustment of Printing Effects 160 161 Trimming the ImagePress 0 to exit the trimming Handling Printer Errors Error Messages 162 Setting the Printing Options Select Print order Select Set upDigital Print Order Format Dpof Set the option as desired 164 Press the 7 button Print Ordering 165 Set the Paper settings. p.156 WDirect Printing with DpofPreparing to print Under the 3 tab, select Print order. Select Print DTransferring Images to a Personal Computer 167 All images Transferring Images to a Personal Computer168 169 New imagesTransfer order images Select & transfer Under the 3 tab, you can use 3Selecting the Images to be Transferred170 Customizing Camera 3Setting Custom FunctionsN Custom Function No Select the Custom Function numberClearing All Custom Functions 172 3Custom FunctionsN 173 174 3Custom Function SettingsNFn I Exposure Fn I -6 Safety shift Fn I -7 Flash sync. speed in Av mode175 Fn I -5 Bracketing sequence Fn II Image 176Fn II -1 Long exposure noise reduction Fn II -2 High ISO speed noise reduction Disable Enable 177Fn II -3 Highlight tone priority Fn II -4 Auto Lighting Optimizer Fn III -1 Lens drive when AF impossible Fn III Autofocus/Drive178 Fn III -2 Lens AF stop button function 179 Fn III -3 AF point selection methodFn III -4 Superimposed display Fn III -5 AF-assist beam firing Fn III -7 AF point area expansion 180Fn III -6 Mirror lockup Fn III -8 AF Microadjustment Disable Adjust all by same amountAdjust by lens 181 Fn IV -2 AF-ON/AE lock button switch Fn IV Operation/Others182 Fn IV -1 Shutter button/AF-ON button Fn IV -4 Dial direction during Tv/Av 183Fn IV -3 Assign SET button Fn IV -5 Focusing Screen Eg-A Eg-D Eg-S About focusing screen characteristics184 About Super Precision Matte Eg-S and Maximum Lens Aperture 185 Fn IV -6 Add original decision data Select My Menu settings About My Menu settings3Registering My MenuN Select Register WRegister Camera User SettingsN Select Camera user settingAbout Camera user setting’s Clear settings Under the 7 tab, select Camera user setting, then press Shooting functions Settings Registered188 Reference BChecking Camera Settings Camera SettingsDisplay Camera set. and Shoot. func Display one of them Shooting Functions 191 192 3Checking the Battery InformationSelect Battery info 193 Registering the Battery to the CameraPress the B button Labeling the Serial No. on the Battery Take out the battery and affixWrite the serial No. on a label Label 195 Select the battery pack to be deletedLook for the serial No Using a Household Power Outlet Connect the power cordConnect the DC plug Place the cord in the groove Replacing the Date/Time Battery Set the power switch to Unscrewscrew. the battery holderTighten the battery holder screw Make sure the battery is in the proper + orientation Mode Dial Function Availability Table198 Set automatically User selectable 199 Program shiftAE lock Flash control Live View Stills only Shooting Stills+movie Menu Settings 2001Shooting 1 Red 2Shooting 2 Red 201 4Playback 2 Blue5Set-up 1 Yellow 6Set-up 2 Yellow 202 7Set-up 3 Yellow8Custom Functions Orange 9My Menu Green Troubleshooting Guide 203Charger’s lamp blinks at high speed Charger’s lamp does not blink Battery becomes exhausted quickly 204Camera turns off by itself No images can be shot or recorded 205 Image is out of focusCard cannot be used Maximum burst during continuous shooting is lower 206 Flash does not fireFlash always fires at full output Flash exposure compensation cannot be set 207 208 Error Codes 209 Bundled Accessories System Map210 AC Adapter Kit 211 System Map Specifications 212 213 ViewfinderAutofocus Exposure Control 214 ShutterDrive System External Speedlite 215 216 Battery Charger LC-E6E 217About Full HD EF 24-105mm f/4L is USM 218 TrademarksAbout MPEG-4 Licensing 219 Preventing Serious Injury or Death 220 Preventing Injury or Equipment Damage 221 European Union and EEA only Index 222 223 224 191 225 226 227 CEL-SL6EA210

Canon EOS 5D instruction manual 152

Models: EOS 5D

152