Canon G3 manual Select images for printing, Single Images, All the Images on a CF Card, Press the

Print Settings (DPOF Print Settings) (continued)

3 Select images for printing.

Single Images

•When the print type (p. 147) is set to [Standard] or [Both], select an image using the main dial or the B or A arrow on the omni selector. You can set the number of copies (up to 99) to be printed using the C or D arrow on the omni selector.

•When the print type (p. 147) is set to [Index], select an image using the main dial or the B or A arrow on the omni selector and mark or remove marks from images using the C or D arrow on the omni selector.

•You can use the same procedures to select images in index replay (3 images). Press the button to switch between single replay and index replay.

All the Images on a CF Card

•Press the button to switch to index replay (three images).

•You can set one copy of each image to print by

pressing the button, then selecting [Mark all] using the C or D arrow on the omni selector, and

pressing the button again.

•When the print type is set to [Standard] or [Both], the setting for the number of print copies can be changed for each image. When [Index] is selected, the print settings can be deleted. For the instructions on changing settings, please reread Step 3 from the beginning.

•You can cancel all the settings by selecting [Clear all].

Number of Copies

4	Press the	button.
	• The selection mode will turn off and the Print Order menu will reappear.

146