Canon G3 manual Select images for transferring, Press the, button, Single Images

3 Select images for transferring.

Single Images

•Select an image using the main dial or the B or A arrow on the omni selector and mark or remove marks from images using the C or D arrow on the omni selector.

•You can use the same procedures to select images in index replay (3 images). Press the button to switch between single replay and index replay.

All the Images on a CF Card

•Press the button to switch to index replay (three images).

•Then press the button, and select [Mark all] using the C or D arrow on the omni selector and

press the button again. (If you select [Clear all] instead of [Mark all], you can remove marks from all the images.)

•You can select images using the main dial or the B or A arrow on the omni selector and change the settings using the C or D arrow on the omni selector after [Mark all] or [Clear all] has been selected.

4	Press the	button.
	• The selection mode will turn off and the Transfer Order menu will reappear.

• Images are transferred in order from oldest to newest by the shooting date.

• A maximum of 998 images can be marked per CF card.

•Transfer settings can also be assigned to images with the supplied software programs on a computer.

Printing, Transferring

153